The electrical connectors varying in many types and styles are available in the market for a marine consumer. There are a variety of connectors used for making connection between the wires. One of the most prominent among them is butt connector. The butt connectors having high quality are manufactured using tinned copper so that the current flow is high and there is also a high protection against corrosion. The thick walls of these wires are of heat shrink type so that the mechanical strain is also relieved to an extent. When connections are made to an electrical appliance or bus bar that has screws or lugs, the wire should be terminated. It is recommended from the reliable sources to use connectors having tubing which are heat shrink along with adhesive lining.
Sometimes it is impossible to use a red-eye connector in case of dealing with screws like captive screw thus bring into the scene other type of connectors. The ends are turned up causing the terminals to be hold in place. Very carefully do secure and bundle the connections on the boat wiring. This is one of the most important things to be noticed so that the effort till now doesn't go futile. Initially use the hands for making tight bundles. Then use plastics to secure them. Generally wire hangers made of plastics are used to tighten the entire system from damage caused by vibration or jolt. If right wires are used, connections made are watertight, and all the wires are securely fastened, then the boat wiring system will provide services with ease and no hassles.